National unified hotline+86-757-81992771



(Whatsapp/Wechat): Molly: +86-15813683638 

Email: sales@toyedent.com  molly@toyedent.com  maureen@toyedent.com 

Dental LED Curing Light

Position : Details

TY-308 2 in 1 in teeth whitening and Light curing light

Product specifications

Charging dock

A, Charger input: AC100V-AC240V 50/60Hz 0.3a

B. Charging seat input: DC5V 1A

C, charging seat output: DC4.2V 0.5a

D, charging indicator light: yellow

E, finish charging indicator: green

F, size: length: 132 cm

Width: 66 cm

Height: 50 cm

G, weight: 60 grams

H, charging time completed: about 5 hours

The host

A, Power supply: Carp ion battery, 3.7 volts, 4400MAH

B. Wavelength range: 420nm~490nm

C. Length: 85cm (excluding light guide bar)

155 cm (including light guide)

C, width: 40 cm

D, SERIOUS: 146 cm

E, weight: 200g (including light guide and battery)

Operating environment:

A. Relative humidity: less than 82% at 35 °C

It's less than 50% at 40 degrees

B. When charging is completed, the green indicator light on the charging seat will light up;



Share :

Operation instructions

The treatment of key

Press the treatment button to start the treatment, and press the treatment button to stop the treatment during the treatment.

Mode key (M)

Press the mode button to select any of the quick mode, pulse mode, creasing mode and whitening mode as the treatment mode.

Time key (T)

The time of fast mode, pulse mode and asymptotic mode can be adjusted to 5 seconds,

10 seconds, 15 seconds, 20 seconds, 25 seconds 30 seconds, 35 seconds, 40 seconds.The time of whitening mode can be adjusted for 1~30 minutes.

Power key (P)

Press the power key to adjust the output power of the current mode. There are four levels of power to choose from.




3. Standard packaging content

Charging a Ipc

The host Ipc

Light the Ipc

Shade the Ipc

The hoary head Ipc

The charger Ipc

User manual Ipc

V. Installation method

Charging dock

A. Please first confirm whether the local voltage is consistent with the product voltage setting

B. Place the charging seat on a flat surface

C, connect the power cord of the charging stand to the socket

Main engine and light guide bar

A. Disinfect the light guide rod before the first use

B. Next, insert the light guide rod into the host machine until the light guide rod is properly stuck in place

C. Before use, put the host on the charging seat to be fully charged (the yellow LED light will be on during charging, and the green LED light will be on after charging).



[ Print] [ Close]